CABLE RAILING
 |
|
These RailFX EXPRESS MOUNT BRACKETS™ in stock!
Cable Railing Made Easy
THE FIRST EVER DIY FRIENDLY CABLE RAILING INSTALLATION.
It’s now easier than ever to broaden your view. Express Mount Brackets drastically reduce cable railing installation time by eliminating the
need to drill holes through wood posts. Say goodbye to your outdated railing and say hello to a sleek and modern solution that will transform
an outdoor living space into a beautiful oasis to be enjoyed for years to come.
Express Mount Brackets are compatible with the RailFX Classic (102) Cable Kits and work for both level and stair railing applications, at a DIY or Professional level.
Why choose Express Mount Brackets?
Simple to use has never looked this good. Take your outdoor space to the next level with beautifully modern cable railings. The best part? You’ll barely see them once they’re up.
- Eliminate the frustrations of cable railing with no drilling through posts and quicker installation.
- For 36” or 42” posts, ideal for level railing and stair applications.
- Hardware installs on the exterior of the posts, creating an illusion of floating cables.
|
|
 |
|
|
RailFX CLASSIC (BASIC 102) 1/8" CABLE KIT FOR LEVEL OR PITCHED RUNS in stock!
A through-the-post configuration is the ideal scenario to use the Classic (Basic 102) threaded stud cable kits. The threaded studs are a
functional fitting, not a hide-in-the-post solution. A brass hex nut and some metal thread (both covered by an end cap) will extend beyond the back of
the post on one end. A Pull-Lock® fitting is installed through the other end.
For either wood or metal posts, use the Classic (Basic 102) Series. The tensioning device is a 2-7/8” long threaded stud which installs on the back side of one end post.
When taking cable railing through a corner, do not bend the cable past 45° at any one time. If turning 90°, a 2-step turn using a double corner post configuration is required.
The Classic (Basic 102) Series kit is offered with cable lengths from 5′-50′. Each kit contains the cable and hardware needed to complete one run. |
|
 |
Tools Required for Installation
- 7/32″ Drill Bit
- 1/4″ Drill Bit
- 1/2″ Drill Bit
- 1/8″ Hex Wrench
- 7/16″ Wrench
- RFXPL-KEY
- Cut Off Kit (mandrel)
- Cut Off Kit (wheel)
- Pre-Tensioning Block
- Lacing Needle
The Installation Kit contains all of the above items |
 |
 |
|
 |
|
| RailFX CLASSIC 102 1/8" Cable Kit |
| 5' Cable Package |
$27.57 |
|
10' Cable Package |
$34.38 |
|
15' Cable Package |
$38.14 |
|
25' Cable Package |
$40.70 |
|
30' Cable Package |
$46.94 |
| 40' Cable Package |
$52.80 |
50' Cable Package |
$59.65 |
100' Cable |
$66.75 |
500' Cable |
$313.33 |
1/8" Sleeve Pkg (4) |
$6.15 |
| WLN181 Wood Level Non-Tension 1 pk |
$20.84 |
WLN1810 Wood Level Non-Tension 10 pk |
$198.00 |
WLT181 Wood Level Tension 1 pk |
$31.17 |
WLT1810 Wood Level Non-Tension 10 pk |
$293.33 |
Cable Cutter |
$47.88 |
| 12FLP 42" Silver Alum Brace |
$32.19 |
12SFLP 50" Stair Brace |
$34.99 |
Cable Gripper |
$8.99 |
Cable Release Tool |
$7.19 |
Installation Kit |
$31.88 |
 |
Installation Kit |
|
 |
These RDI Aluminum Cable Railing products available Special Order, generally about a week lead time.
Available in pre-assembled kits that can install 38% faster than the leading competition* — and easy to shop with fewer SKUs to order —
RDI® Elevation Rail is the perfect quick-to-install cable railing for decks. It requires no special tools or fasteners and is unlike any other cable
railing system on the market. With pre-strung, continuous stainless-steel cables and adjustable panels that span up to 6’ wide, RDI Elevation Rail features
the patent-pending OneTen™ built-in centralized system that eliminates the need to tension each cable individually and decreases the need for seasonal
adjustments. This horizontal cable railing offers a modern, industrial design and a continuous top rail for both level and stair applications. This horizontal
cable railing offers unobstructed views and can be used indoors or outdoors.
*Claim based on a 12’x18’ deck with 8 posts and 7 panels
(RDI Elevation Rail installed 49 minutes faster than competitive cable railing install of 129 minutes).
- Installs 38% faster than the leading competition* and features patent-pending OneTen™ built-in centralized tensioning control system
- Easy to shop with fewer SKUs to order — no special tools or fasteners needed
- Available in pre-assembled kits with pre-installed brackets and pre-strung stainless-steel cables
- Modern, industrial design with continuous top rail for both level and stair applications
- Available in Matte Black
|
 |
| RDI® Elevation Rail - Matte Black |
| 6' Level Rail Kit - 36" Rail Height |
$261.88 |
|
5' Stair Rail Kit - 36" Rail Height |
$226.88 |
|
6' Beam/Top Rail Kit (1 required per section) |
$89.88 |
|
2" x 4" x 36" End Post |
$131.88 |
| 2" x 4" x 36" Mid Post |
$133.88 |
2" x 4" x 36" Corner Post |
$188.88 |
2" x 4" x 36" End Stair Post |
$138.88 |
2" x 4" x 36"Mid Stair Post |
$138.88 |
|
 |
 |
These AFCO Aluminum Railing products available Special Order, generally a few days lead time.
AFCO Series 175 Aluminum Rail features a breadloaf shaped top rail design with Braided 316 Stainless Steel Cable. Pre-drilled
3" Posts available for both corner and line applications. The modern look of cable with the AFCO-Rail aesthetic. |
 |
 |
|
Rail Kit
- Breadloaf Top Rail with
Stabilizer Baluster Connector attached
- Bottom Rail with
Stabilizer Baluster Connector attached
- Pre-Drilled Stabilizer Baluster
- Top and Bottom Mounting Brackets
- Support Block Material
- Mounting Hardware
|
Infill Options
- 1/8" Braided 316 Stainless Steel Cable with
2-3/4" pre-swagged threaded stud and mounting hardware
- Terminating fittings*, for both line and
corner applications, packaged separately
|
 |
 |
| *Stainless Steel Fittings mount to the respective Cable Posts into which the cable runs are inserted and tension fit. The Corner Fittings thread into a pre-drilled and tapped hole in the corner post.
One fitting is required per cable run. 9 required for 36" Rail Height, 11 for 42" Rail Height. |
| Series 175 Cable Railing - Traditional Breadloaf Shaped Top Rail - Textured White, Textured Black & Textured Bronze |
Level Rail Kits including Top & Bottom Rails w/Hardware
& pre-drilled stabilizer - cable sold separately |
|
Hardware & Accessories |
|
Afco SS Cable railing kits
w/pre-swagged threaded stud |
|
Welded Posts with Base,
Cap, Base Trim & ACQ pad |
| 6' Level Rail Kit w/36" Rail Height Stabilizer |
$183.00 |
Line Fitting |
$37.00 |
1/8" x 5' |
$32.00 |
3" x 38" Pre-Drilled Line Post |
$137.00 |
| 6' Fixed Stair Rail Kit w/36" Rail Height Stabilizer (32° - 36°) |
$218.00 |
Corner Fitting |
$48.00 |
1/8" x 10' |
$39.00 |
3" x 38" Pre-Drilled Corner Post |
$156.00 |
| 42" Rail Height Stabilizer (replaces 36" Stabilizer in Rail Kit) |
$21.00 |
Cable Release Tool |
$10.00 |
1/8" x 15' |
$45.00 |
3" x 44" Pre-Drilled Line Post |
$158.00 |
| |
1/8" x 20' |
$51.00 |
3" x 44" Pre-Drilled Corner Post |
$179.00 |
| Uses Series 100 Level Mounting Hardware for Cut Kits, Pivot Brackets, etc. |
1/8" x 30' |
$69.00 |
38" Post for 36" Rail Height
44" Post for 42" Rail Height |
| |
1/8" x 50' |
$95.00 |
|
 |
|
These AFCO Aluminum Railing products available Special Order, generally a few days lead time.
AFCO Series 275 Aluminum Rail features a flat top rail design with Braided 316 Stainless Steel Cable. This profile can
accommodate a deck board, wood or composite, mounted on top to draw the color of the decking into the rail.
Series 275 can also be used as is for a low profile look. Pre-drilled 3" Posts available for both corner and line applications. The modern look of
cable with the AFCO-Rail aesthetic. |
|
 |
|
Rail Kit
- Flat Top Rail with
Stabilizer Baluster Connector attached
- Bottom Rail with
Stabilizer Baluster Connector attached
- Pre-Drilled Stabilizer Baluster
- Top and Bottom Mounting Brackets
- Support Block Material
- Mounting Hardware
|
Infill Options
- 1/8" Braided 316 Stainless Steel Cable with
2-3/4" pre-swagged threaded stud and mounting hardware
- Terminating fittings*, for both line and
corner applications, packaged separately
|
|
|
| *Stainless Steel Fittings mount to the respective Cable Posts into which the cable runs are inserted and tension fit. The Corner Fittings thread into a pre-drilled and tapped hole in the corner post.
One fitting is required per cable run. 9 required for 36" Rail Height, 11 for 42" Rail Height. |
| Series 275 Cable Railing - Flat Top Rail - Textured White, Textured Black & Textured Bronze |
Level Rail Kits including Top & Bottom Rails w/Hardware
& pre-drilled stabilizer - cable sold separately |
|
Hardware & Accessories |
|
Afco SS Cable railing kits
w/pre-swagged threaded stud |
|
Welded Posts with Base,
Cap, Base Trim & ACQ pad |
| 6' Level Rail Kit w/36" Rail Height Stabilizer |
$192.00 |
Line Fitting |
$37.00 |
1/8" x 5' |
$32.00 |
3" x 38" Pre-Drilled Line Post |
$137.00 |
| 6' Fixed Stair Rail Kit w/36" Rail Height Stabilizer (32° - 36°) |
$232.00 |
Corner Fitting |
$48.00 |
1/8" x 10' |
$39.00 |
3" x 38" Pre-Drilled Corner Post |
$156.00 |
| 42" Rail Height Stabilizer (replaces 36" Stabilizer in Rail Kit) |
$21.00 |
Cable Release Tool |
$10.00 |
1/8" x 15' |
$45.00 |
3" x 44" Pre-Drilled Line Post |
$158.00 |
| |
1/8" x 20' |
$51.00 |
3" x 44" Pre-Drilled Corner Post |
$179.00 |
| Uses Series 200 Level Mounting Hardware for Cut Kits, Pivot Brackets, etc. |
1/8" x 30' |
$69.00 |
38" Post for 36" Rail Height
44" Post for 42" Rail Height |
| Series 300 Adjustable Stair Rail Meets ADA Graspable Handrail and is suggested for use with Series 200 |
1/8" x 50' |
$95.00 |
|
|
More Styles from AFCO
 |
Westbury® C80 Verticable Aluminum Railing |
 |
Are you looking for a way to upgrade your outdoor space and make it more beautiful and functional? Look no further than Westbury VertiCable aluminum cable
railing. This cable deck railing system is designed to provide both safety and style, all while offering unobstructed views.
With VertiCable, you can enjoy the outdoors with peace of mind, knowing that your railing system is engineered to provide a safe area for children and pets. Plus, the railing is
code approved for both residential and commercial applications, ensuring that you can use it for any project you have in mind.
But that is not all. VertiCable railing system is also built to last. Made from high-quality aluminum, it offers a lifetime of durability and low maintenance. And with its sleek
and modern design, it is sure to enhance the curb appeal of any property.
Westbury Verticable Colors, Sizes and Pricing |
 |
And an alternative to cable ...
 |
TREX Signature® Rod Rail Aluminum Railing products
available Special Order, generally a few days lead time.
Trex Signature® Rod Rail Aluminum railing is
available in a 36" rail height and 6' or 8' lengths.
The traditional vertical
posts can be customized
using aluminum or composite posts.
Charcoal Black color only. Effortless style, exceptional strength.
Made from premium aluminum. |
Rod Rail |
|
Combined Horizontal Rod Rail & Vertical Round Balusters |
36" Rod Rail Height Kits including Top & Bottom Rails w/Hardware
and Round Horizontal Balusters |
TREX Signature Aluminum Rail Posts - Charcoal Black, Bronze or Classic White |
| 6' x 36" Level Rail Kit |
$500.88 |
8' x 36" Level Rail Kit |
$686.88 |
|
2½" x 37" Post Kit w/Cap & Skirt |
$91.88 |
| 6' x 36" Stair Rail Kit |
$500.88 |
8' x 36" Stair Rail Kit |
$686.88 |
2½" x 53" Stair Post Kit w/Cap & Skirt (cut to length) |
$126.88 |
| Level Cut Kit |
$99.88 |
Stair Cut Kit |
$99.88 |
More Styles from TREX
ALUMINUM RAILINGS
Due to the inherent nature of monitor display, browser version, etc. the colors may vary in hue from what is shown here.
