|
Superdeck Brand Products
Superdeck® Safe Solution Concrete Etcher
|
 |
| Superdeck® Safe Solution Concrete Etcher
Safe Solution Concrete Etcher is concentrated,
biodegradable, versatile and non-corrosive. It etches and cleans concrete and masonry
surfaces. It removes dirt, efflorescence, mortar deposits, rust stains and much more.
- Prepares concrete for paints and stains
- Roughens smooth and slippery concrete
- Removes ground-in dirt, mud and clay
- Removes mortar deposits
- Safer than muriatic acid
- Biodegradable
Mason's Select Safe Solution is a waterborne solution of non-corrosive, low-PH
organic salts that have been specially formulated to clean and roughen or etch
concrete surfaces. Mason's Select Safe Solution has been specifically formulated
to replace extremely corrosive and hazardous concrete etching products such as
muriatic acid (hydrochloric acid) and phosphoric acid. Mason's Select Safe
Solution is non-corrosive to skin, low-fuming, low-odor and biodegradable, and
it has zero VOC (volatile organic compound). Mason's Select Safe Solution is
slightly bodied to cling to non-level surfaces, and it achieves a very uniform
etch.
|

Mason' Select Safe Solution Concrete Etcher Gallon
$17.88 |
 |
|
| Prepares concrete for paints and stains: Mason's Select Safe
Solution prepares concrete for paints and stains by roughening and cleaning the surface so that
coatings can adhere to the concrete.
Roughens Smooth and Slippery Concrete: Hard trowled concrete can be slippery and dangerous,
especially when wet. Mason's Select Safe Solution roughens these surfaces. Excellent for entryways
and sidewalks. |
|
| Superdeck® Clear Concrete Sealers
Mason's Select® Clear Concrete Sealers are durable, non-yellowing,
100% acrylic concrete and masonry sealers. Clear concrete sealers block out moisture while providing
excellent resistance to hot tire pick-up, UV rays, gasoline, oils and other chemicals, and wear from
foot and vehicle traffic. May be used as a topcoat over Mason's Select Transparent Concrete Stain
and/or Epoxacryl Solid Color Concrete Stain to provide added protection. Available in Satin (6510)
and Gloss (6520) finish.
Where to Use: Apply Clear Concrete Sealers to concrete patios, porches, steps, sidewalks, driveways,
garage and basement floors, stained concrete, unglazed tile, untreated brick, exposed aggregate and
other concrete or masonry surfaces. |

Mason' Select Satin Clear Sealer Gallon
$31.88 |
- A subtle clear sealer
- Beautifies and protects concrete and masonry surfaces from dirt, oil and chemicals
- Protects against UV rays, auto fluids and mildew stains
- Will not yellow, crack or peel
- Easy soap-and-water cleanup
|

Mason' Select Gloss Clear Sealer Gallon
$31.88 |
- High-gloss finish
- Beautiful "wet look" sheen
- Protects against UV rays, auto fluids and mildew stains
- Will not yellow, crack or peel
- Easy soap-and-water cleanup
|
|
|
| Transparent Concrete Stain
Solid Color Concrete Stain
Superdeck Products |
|
| Due to the inherent nature of monitor display, browser version, etc. the colors may
vary in hue from what is shown here. |
|
|
|
|