banner

AZEK Deck Products
Rail Lighting Installation Guide

Azek Decking AZEK Rail

Rail Lighting Installation Guide
Page 5

Installing Under-Rail Light


  1. Choose the location for the Under-Rail Light so it is centered on the balusters.
  2. Drill a 3/8" hole to feed the wire through the RadianceRail Support Rail.
  3. Feed the wire and mount the light to the recessed RadianceRail Support Rail making sure the light is tilted in (light comes with a 15° tilt which is usually facing the deck). Use the center alignment beam for a guide for the 2 screws. Use #8 x ¾" screw size.
  4. Trim excess wire length and make wire connection to the main circuit wire using nuts provided.
AZEK

Installation Guide Page 7 (Transformer/Dimmer)
Installation Guide Page 6 (In-Deck Light)
Installation Guide Page 4 (Riser Light)
Installation Guide Page 3 (Accent Light)
Installation Guide Page 2 (Post Cap Light)
Installation Guide Page 1 (Overview)
Rail Lighting

Fox Home Page
Decks
Receive a copy of our
current advertising flyer by mail!
QUESTIONS? Email Us
image