AZEK Deck Products
Rail Lighting Installation Guide

Azek Decking AZEK Rail

Rail Lighting Installation Guide
Page 4

Installing Stair Riser Light

  1. Locate and mark vertical and horizontal centerlines for Stair Riser Light location. Level back plate and secure using #6 x 1" wood screws.
  2. Use the back plate as a template to locate center of the 1" hole for the wire.
  3. Cut a 1" diameter hole at the center point, at a slightly downward angle, using a 1" spade bit.
  4. Trim excess wire length and make wire connection to the main circuit wire using wire nuts provided.
  5. Align the 1" hole and assure alignment between the Stair Riser Light and the back plate.
  6. Secure housing to back plate using the set screw with a 2.5mm Allen wrench.


Installation Guide Page 7 (Transformer/Dimmer)
Installation Guide Page 6 (In-Deck Light)
Installation Guide Page 5 (Under-Rail Light)
Installation Guide Page 3 (Accent Light)
Installation Guide Page 2 (Post Cap Light)
Installation Guide Page 1 (Overview)
Rail Lighting

Fox Home Page
Receive a copy of our
current advertising flyer by mail!