|3 FT V-1-A
|4 FT V-1-A
|6 FT V-1-A
||Aluminum Threshold 3-3/4" wide. For gaps 5/8" to 7/8" above the floor. Pre-drilled and ready to install. No bevel
is required on the bottom of the door. Cut the door so that the bottom of the door is 1/4" above the top of the aluminum portion
of the threshold. This threshold
will function properly if the door is 1/8" to 3/8" above the aluminum. Before installing, discard plastic packing
supports under each end of vinyl seal.
Packaged with screws.
The patened design of this threshold makes it
virtually imposible to wear out the vinyl. If the vinyl portion of this threshold should wear out, mail the
vinyl back to Randall and a free replacement will be sent to you.