|
National Mfg Co. has offered us some of the items they are re-vamping
and we could not pass up these prices!! All items in their Pewter finish, which matches up with Brushed Chrome,
Satin Nickel, Stainless Steel, etc. Supplies are limited, don't delay!!
N325-316 7" Door Knocker
$27.99 $5.59
|
INSTALLATION:
Packaged with matching screws and finishing washers to accomodate an
1¾" thick door. Screws can be cut to the appropriate length for doors less in thickness. For doors
greater than 1¾", use #8-32 machine screws.
MATERIAL: Solid brass, pewter finish
MAINTENANCE: Clean with soft cloth and mild soap
3½" wide |
|
 |
|
N326-603 2"x11" Mail Slot
$48.99 $18.69
|
|
| INSTALLATION:
 |
|
Outside dimensions: 13" x 3½"
Packaged with cutout/drilling template
MATERIAL: Solid brass, pewter finish
MAINTENANCE: Clean with soft cloth and mild soap |
|
|
|
|
N325-415 6"x30" Kick Plate
$24.99 $8.49
|
|
INSTALLATION:
Packaged with Stainless Steel installation Screws.
- Carefully remove kickplate from package. Do not remove protective plastic cover until
installation is completed. Position the kickplate in the center at the bottom of the door.
- Mark holes on door.
- Drill 3/32" pilot holes, approximately 3/4" deep.
- Important: Attach enclosed foam squares to back of kickplate
- Install Screws. (To prevent screw breakage, lubricate before installing.)
- Peel off protective plastic cover and polish.
MATERIAL: Solid brass, pewter finish |
|
|
|
|
N325-423 8"x34" Kick Plate
$32.99 $11.89
|
|
INSTALLATION:
Packaged with Stainless Steel installation Screws.
- Carefully remove kickplate from package. Do not remove protective plastic cover until
installation is completed. Position the kickplate in the center at the bottom of the door.
- Mark holes on door.
- Drill 3/32" pilot holes, approximately 3/4" deep.
- Important: Attach enclosed foam squares to back of kickplate
- Install Screws. (To prevent screw breakage, lubricate before installing.)
- Peel off protective plastic cover and polish.
MATERIAL: Solid brass, pewter finish |
|
|
|
