Self-Closing Fully Adjustable Hinges
The hinge mounting brackets should be located as shown, with the wide flange
installed on the post, and the narrow flange positioned on the gate. The brackets
should be positioned on the outside surfaces of the posts with the gate in the closed position.
The top edge of the upper hinge should be mounted within 6" of the top surface of the top rail,
and the bottom edge of the lower hinge should be mounted within 6" of the lower surface of the
lower rail. The hinge mounting brackets should be centered to one another as closely as
possible. In applications where additional hinges are used, they shoulbe evenly spaced between
the upper and lower hinges.
|Install the hinge assembly to the hinge mounting brackets and secure
with the 6 acorn nuts. Hinge should be positioned as shown so that the locking gooves
on the hinge mounting brackets will align with grooves on the back side of the hinge
assembly. This will allow the hing to be adjusted horizontally on the gate side, and
vertically on the post side.