|Tiger Claw TC-3 Composite Fastener
300 Series Stainless Steel with black oxide coating to better hide fastener between boards.
When using Tiger Claw fasteners please review and comply with these requirements to obtain proper
installation. Failure to follow these requirements may result in deck failure and/or void of warranty.
Inspect decking material prior to installation. Omit any planks that contain hooks, twists, splits, cracks, or other defects. Always
install decking with the crown upward.
Fastener provides an automatic 3/16" spacing, but will accommodate up to 5/16". We recommend spacing according to
the decking manufacturer specifications. Check the decking manufacturer’s installation guide for spacing details. If decking is less
than 5/16" in thickness, pre drilling may be required. Test fasteners in decking before installation begins.
PRODUCT FEATURES & COMPATIBILITY
Developed specifically for use with composite or synthetic decking materials and some medium density hardwoods.
* TC-3 will work in the following composite and synthetic decking lumber varieties:
- Atlantic White Cedar
- Green Tree (2x4 hollow)
- Rhino Deck
- TimberTech (5/4 planking)
- Weather Best
* TC-3 will NOT work in the following composite and synthetic decking lumber varieties:
TimberTech 2"x6" hollow plank
|TC-3 - Composite Fastener
with screws50 sq.ft. pkg at 16" o.c. joists
90 pc count
|Easy to install
Quality is worth the time invested, installation is as simple as 1-2-3.
Simply drive Tiger Claw into decking edge using installation block provided
Install decking screw through Tiger Claw fastener, securing it to the support
Set next course of decking by driving onto "claws" with long handle sledge hammer