|Tiger Claw TC-2 Softwood Fastener
300 Series Stainless Steel with black oxide coating to better hide fastener between boards.
When using Tiger Claw fasteners please review and comply with these requirements to obtain proper
installation. Failure to follow these requirements may result in deck failure and/or void of warranty.
Inspect decking material prior to installation. Omit any planks that contain hooks, twists, splits, cracks, or other defects. Always
install decking with the crown upward.
Recommended for use in 5/4" or thicker lumber. Softwood decking will inherently experience shrinkage.
When using decking material prone to high shrinkage, decking should be installed tightly together allowing shrinkage to provide gap over
time. Shrinkage of decking board width must be limited to a maximum of 1/4".
PRODUCT FEATURES & COMPATIBILITY
TC-2 is ideal for soft and low density woods*, 5/4” to 2” in all environments, including harsh or
* TC-2 will work in the following decking lumber varieties:
- Atlantic White Cedar
- Coast Fir
- Douglas Fir
- Eastern Spruce
- Eastern White Cedar
- Port Orford Cedar
- Southern Yellow Pine
- Pressure Treated Lumber
- Western Red Cedar
- Western Redwood
- Yellow Cedar
|TC-2 - Softwood Fastener
with screws50 sq.ft. pkg at 16" o.c. joists
90 pc count
|Easy to install
Quality is worth the time invested, installation is as simple as 1-2-3.
Simply drive Tiger Claw into decking edge using installation block provided
Install decking screw through Tiger Claw fastener, securing it to the support
Set next course of decking by driving onto "claws" with long handle sledge hammer