Artfully designed to blend with today's most popular composite and hardwood decking,
HEADCOTE® offers the following:
Greatly improved appearance
Increased owner satisfaction
Stainless steel quality and durability
The largest selection of color choices
Approved for ACQ treated lumber
The highest quality and most reliable supply
Proven and tested in the marketplace
HEADCOTE® deck screws are #305 stainless, have auger points, square recesses and countersinking
nibs. In some materials, such as certain hardwoods and dense composites, pre-drilling may be necessary. (Check with composite
deck board manufacturer's installation instructions for recommendations). For best results and a perfect hole and fit every
time, use the SMART-BIT® pre-drilling and countersinking tool.
The coating used for HEADCOTE® has been specially formulated for durability but, like all coatings in outdoor and flooring
applications, it is subject to wear based on foot traffic and and exposure to the elements.
Matching Composites
White (#39)
Ivory (#45)
Olive Gray (#51)
Warm Gray (#54)
Gray (#37)
Sand (#64)
Rosy Brown (#65)
Chocolate (#71)
Tan - Gray (#31)
Cedar (#81)
Mahogany (#82)
Brown (#34)
#8 x 2-1/2" Deck Pack
QTY: 1,750 screws for 500 sq.ft. of decking $319.88 ea.
Uses #2 Square Drive Bit (Packaged with one #8 SMART-BIT)
#8 x 2-1/2" Deck Pack
QTY: 350 screws for 100 sq.ft. of decking $69.88 ea.
Uses #2 Square Drive Bit (Packaged with one bit)
#8 x 2-1/2"
QTY: 100 screws for 30 sq.ft. of decking $22.88 ea.
#7 x 1-5/8" Trim Pack 100 count Package $19.88 ea.
Uses #1 Square Drive Bit (Packaged with one bit)
When combined with the SMART-BIT, the pre-drilling and countersinking tool specifically designed
for use with the HEADCOTE® deck screws, the once difficult task of pre-drilling an entire deck becomes fast and
easy. SMART-BIT® makes a hole 1-1/8" deep, including the depth of the countersink. It is general practice not
to pre-drill the underlying (joist) material, as this is usually treated lumber and does not require pre-drilling.
SMART-BIT® provides sufficient depth for installing deck lumber up to 5/4" nominal size.
The SMART-BIT® tool package contains one (1) complete tool, two (2) extra replacement
bits and one (1) hex wrench. Choose either the #7 size for the 1-5/8" Screws or the #8 size for the 2-1/2" Screws.
The SMART-BIT® Tool Package - $15.88 ea.
The SMART-BIT® Replacement Bit Package - $13.88 ea.
