banner

CableRail by Feeney
Cable Needle Instructions

Cable Rail
CableRail Standard Assemblies Make Measuring,
Ordering, and Installing a Breeze

CableRail Needle Instructions

Cable Rail 1) Make sure the end of the cable is cut cleanly (no splayed wires) then insert the cable approximately half way into hole in the end of the Lacing Needle.
Cable Rail 2) Bend the cable to form a slight kink then push the cable all the way into the hole. The kink will hold the cable tight.
Cable Rail 3) You're ready to begin lacing the needle and cable through the post holes.
Cable Rail 4) When finished, remove the needle and cleanly cut the cable below the kink mark.
IMPORTANT: Remove lacing needle before inserting cable into QuickConnect®SS fitting.

Cable Rail

Cable Lacing Needle

#3221 - For 1/8" Cable

$10.43

  Qty:

Components
CableRail by Feeney Step-by-Step Installation CableRail Overview

 

Fox Home Page
Receive a copy of our
current advertising flyer by mail!
QUESTIONS? Email Us
image